Dip Powder System
65 Blueberry
$11 USD
$22 USD
Please note this item is final sale. No refunds or exchanges.
Blue raspberry, sheer finish
Achieve superior nail strength with the BSG Dip Powder System, an alternative system to gel and acrylic. Must use with Dip Liquids #1-5.
Individual Size: 2 oz (56 g)
Purpose:
- Provides 2+ weeks of superior strength and chip-free colour when used with Dip Liquids
- Promotes natural nail growth
- Applies onto natural nail or over artificial extensions
- 2-in-1 formula can create traditional acrylic with choice of monomer
Benefits:
- Speedy application
- Air-dry with no LED/UV lamps needed
- 30+ applications per jar
- Odour-free
- Soak-off removal
- Available in inspired shades of 3STEP Colour Gel Polish and BeBio Nail Lacquer
- 114 colour choices
Notice: As of October 2020, BSG Dip Powder Colours are being discontinued. Any out of stock colours will not be restocked.
DIP POWDER INSTRUCTIONS
Dip Powder is an alternative soak-off system to gel and acrylic that provides 2+ weeks of superior strength and chip-free colour. Dip promotes natural nail growth and can be applied onto natural nails or over artificial tip extensions.
As an air-dry product, Dip Powder does not require the use of any LED/UV lamps.
1. PREP NAILS
Lightly buff nails and cleanse with 70%+ alcohol to remove oils and dusts.
2. DIP LIQUID #1 PREP
Apply one coat of #1 Prep to all fingernails and allow 60 seconds air-dry time.
3. DIP LIQUID #2 BASE & DIP POWDER #0 NATURAL
Applying on one fingernail at a time:
Apply one thin coat of #2 Base on only 75% of the nail, leaving space at the cuticle.
Immediately dip into #0 Natural in a 45° angle and tap off excess powder.
Repeat with the rest of the fingernails.
Allow 60 seconds air-dry time.
4. DIP POWDER COLOUR FIRST COAT
Applying on one fingernail at a time:
Roll and shake jars well before use.
Apply one thin coat of #2 Base to 100% of the nail. Immediately dip into desired Dip Powder Colour in a 45° angle and tap off excess powder.
Repeat with the rest of the fingernails.
Allow 60 seconds air-dry time.
5. DIP POWDER COLOUR SECOND COAT
Repeat Step 4 until desired opacity is reached per fingernail.
Allow 60 seconds air-dry time.
6. DIP POWDER #00 CLEAR
Applying on one fingernail at a time:
Roll and shake jars well before use.
Apply final thin coat of #2 Base to 100% of the nail. Immediately dip into #00 Clear in a 45° angle and tap off excess powder.
Repeat with the rest of the fingernails.
Allow 60 seconds air-dry time.
7. DIP LIQUID #3 ACTIVATOR
Apply one coat of #3 Activator to all fingernails.
Allow 60 seconds air-dry time.
8. BLEND & SHAPE
File, buff and shape nails as desired.
Apply final layer of #3 Activator to all fingernails.
Allow 60 seconds air-dry time.
9. DIP LIQUID #4 TOP
Apply 2 coats of #4 Top immediately back to back.
Allow 5 minutes of air-dry time.
Note: First coat of #4 Top must be wet to properly adhere to second coat of #4 Top. Count 5-10 seconds between applying the first layer and second layer.
10. DIP LIQUID #5 BRUSH SAVER (OPTIONAL)
Use #5 Brush Saver to effectively clean, soften and dissolve leftover dip powder on brushes before and after application
Click here to download PDF verison
CARE WARNINGS
Since the Dip Liquids are air-dry products, it is normal that they can get dried over time. To ensure they stay in their best shape, they must be cleansed and sealed tightly after each use.
DO NOT FORCE STUCK BOTTLES OPEN.
This may cause glass bottles to shatter.
We highly recommend to use #5 Brush Saver for bottles that are unable to open. The purpose of #5 Brush Saver is to effectively cleanse, and dissolve any solidified dip powder on brushes both in-between and after use
To open stuck bottles:
Place in very warm water for 2-3 minutes. This will help loosen the dried product.
After 5 minutes, carefully remove from water and swipe #5 Brush Saver around the rim of your bottle and open slowly. If bottle is still not opening, repeat steps with warmer water.
To clean hardened brushes:
Simply insert the hardened brush into #5 Brush Saver and allow a few minutes to dissolve. You can also opt to swap the #5 Cap + Brush with the hardened bottle regardless of which type.
Dip Powder is an alternative soak-off system to gel and acrylic that provides 2+ weeks of superior strength and chip-free colour. Dip promotes natural nail growth and can be applied onto natural nails or over artificial tip extensions.
As an air-dry product, Dip Powder does not require the use of any LED/UV lamps.
1. PREP NAILS
Lightly buff nails and cleanse with 70%+ alcohol to remove oils and dusts.
2. DIP LIQUID #1 PREP
Apply one coat of #1 Prep to all fingernails and allow 60 seconds air-dry time.
3. DIP LIQUID #2 BASE & DIP POWDER #0 NATURAL
Applying on one fingernail at a time:
Apply one thin coat of #2 Base on only 75% of the nail, leaving space at the cuticle.
Immediately dip into #0 Natural in a 45° angle and tap off excess powder.
Repeat with the rest of the fingernails.
Allow 60 seconds air-dry time.
4. DIP POWDER COLOUR FIRST COAT
Applying on one fingernail at a time:
Roll and shake jars well before use.
Apply one thin coat of #2 Base to 100% of the nail. Immediately dip into desired Dip Powder Colour in a 45° angle and tap off excess powder.
Repeat with the rest of the fingernails.
Allow 60 seconds air-dry time.
5. DIP POWDER COLOUR SECOND COAT
Repeat Step 4 until desired opacity is reached per fingernail.
Allow 60 seconds air-dry time.
6. DIP POWDER #00 CLEAR
Applying on one fingernail at a time:
Roll and shake jars well before use.
Apply final thin coat of #2 Base to 100% of the nail. Immediately dip into #00 Clear in a 45° angle and tap off excess powder.
Repeat with the rest of the fingernails.
Allow 60 seconds air-dry time.
7. DIP LIQUID #3 ACTIVATOR
Apply one coat of #3 Activator to all fingernails.
Allow 60 seconds air-dry time.
8. BLEND & SHAPE
File, buff and shape nails as desired.
Apply final layer of #3 Activator to all fingernails.
Allow 60 seconds air-dry time.
9. DIP LIQUID #4 TOP
Apply 2 coats of #4 Top immediately back to back.
Allow 5 minutes of air-dry time.
Note: First coat of #4 Top must be wet to properly adhere to second coat of #4 Top. Count 5-10 seconds between applying the first layer and second layer.
10. DIP LIQUID #5 BRUSH SAVER (OPTIONAL)
Use #5 Brush Saver to effectively clean, soften and dissolve leftover dip powder on brushes before and after application
Click here to download PDF verison
CARE WARNINGS
Since the Dip Liquids are air-dry products, it is normal that they can get dried over time. To ensure they stay in their best shape, they must be cleansed and sealed tightly after each use.
DO NOT FORCE STUCK BOTTLES OPEN.
This may cause glass bottles to shatter.
We highly recommend to use #5 Brush Saver for bottles that are unable to open. The purpose of #5 Brush Saver is to effectively cleanse, and dissolve any solidified dip powder on brushes both in-between and after use
To open stuck bottles:
Place in very warm water for 2-3 minutes. This will help loosen the dried product.
After 5 minutes, carefully remove from water and swipe #5 Brush Saver around the rim of your bottle and open slowly. If bottle is still not opening, repeat steps with warmer water.
To clean hardened brushes:
Simply insert the hardened brush into #5 Brush Saver and allow a few minutes to dissolve. You can also opt to swap the #5 Cap + Brush with the hardened bottle regardless of which type.